Results 1 to 4 of 4
-
11-04-2014, 06:58 AM #1
Stratasys Unveils Numerous New 3D Printers and Materials
What a day it has been for Stratasys. Today they have unveiled numerous new 3D printers as well as materials. This includes 3 new Objet260, and 3 new Object350 machines, as well as two new FDM-based Fortus machines, a desktop Objet30 machine and much much more. As for materials they have announced their ULTEM 1010 Material which is biocompatible, as well as extremely heat and chemical resistant. Full details on what they have announced can be found here: http://3dprint.com/22873/stratasys-new-3d-printers
Below is a picture of a few of Stratasys' new products:
-
11-04-2014, 03:26 PM #2
- Join Date
- Aug 2014
- Location
- Newcastle Australia
- Posts
- 9
Nice, now if they just have to drop those high price tags for their machines and materials down. The objet range used to be around quarter to half a million dollars per machine. Worth its weight in gold?
-
11-04-2014, 03:41 PM #3
- Join Date
- Nov 2014
- Location
- Springfield, NJ
- Posts
- 1
Just 2 quick corrections to the article... The Objet 30 Prime can print between 16 and 36 Micron depending on Material.
The 450 (rather than 380) is focused on running higher end materials (such as the new Ultem). The 380 will not run Ultem 9085 or 1010.
Thanks,
Jim
-
11-04-2014, 03:54 PM #4
Do bed magnets deteriorate.
04-29-2024, 01:35 AM in General 3D Printing Discussion