Results 1 to 2 of 2
Thread: how do you change platform Temp
-
10-31-2014, 10:25 PM #1
- Join Date
- Oct 2014
- Posts
- 1
how do you change platform Temp
how do you change the platform temp and what should it be set at for Abs?
using Replicator g and flashforge Creator X printer
-
11-01-2014, 03:07 AM #2
You can select the temperature for your print platform through the printer settings in your slicing program. I'm not familiar with Replicator G, so I cannot direct you to the section you need. However, there are a number of other Open Source slicer programs that have proved successful. I use Slic3r ( downloaded form Slic3r.com) Others use Cura. No doubt other forum members will come up with their favorite slicer.
The correct temperature for the print platform when printing ABS seems to be found by hit-and-miss experimentation to find the best temperature for each printer. There is good news - most people are printing at 90 C. There are a number of variables, but this is not the place to enter into that discussion.
Old Man Emu
Do bed magnets deteriorate.
04-29-2024, 01:35 AM in General 3D Printing Discussion