Results 1 to 1 of 1
Thread: Hot bed UM1
-
09-04-2014, 03:24 PM #1
- Join Date
- Aug 2014
- Posts
- 8
Hot bed UM1
I have uploaded marlin firmware to support a heated bed, soldered the 4.7k in place. I use my ulti controller to heat the bed but the red led on the board will not light/flash witch means I can turn on/off my relay to control my heat bed.
any help what mite be wrong?
Do bed magnets deteriorate.
04-29-2024, 01:35 AM in General 3D Printing Discussion