Results 1 to 2 of 2
-
07-29-2014, 09:35 PM #1
- Join Date
- Jul 2014
- Posts
- 1
dual extrusion: different infill percentage per extruder
Hi guys,
I want to print a dual extrusion model in which:
material 1: 100% infill (solid)
material 2: 10% infill
I want to print my objects on a MakerBot Replicator 2X.
MakerWare only has 1 infill setting for both extruders.
I checked Slic3r but it seems it also only has 1 infill setting per "print" and not a separate infill per "extruder".
I would really appreciate your help!
Thanks!
Stefanie
-
08-08-2014, 05:09 AM #2
- Join Date
- Jun 2014
- Posts
- 349
Good question. I know you can make shells have more infill layer height than infill.
Do bed magnets deteriorate.
04-29-2024, 01:35 AM in General 3D Printing Discussion