Results 1 to 10 of 255
Threaded View
-
10-20-2014, 06:28 PM #11
I used some foil ducting tape, e.g. http://www.homedepot.com/p/Nashua-Ta...7792/100030120
to cover the threads and the couplers hold fine after tightening them.
I used some foil ducting tape, e.g. http://www.homedepot.com/p/Nashua-Ta...7792/100030120
to cover the threads and the couplers hold fine after tightening them.
Do bed magnets deteriorate.
04-29-2024, 01:35 AM in General 3D Printing Discussion