Results 1 to 3 of 3
Thread: Kossel Mini Build - Completed
Threaded View
-
05-12-2014, 01:34 PM #1
Kossel Mini Build - Completed
First, a pic of it finished!
https://www.flickr.com/photos/jabella/13968524957/
Built a Kossel Mini on Friday night. Nothing elaborate....
- standard files
- airtripper
- j-head 1.75 / .5 nozzle
- ramps
- igus rails
- carbon rods / traxxas ends, etc
Got it up and running Friday night with a few decent test prints.
https://www.flickr.com/photos/jabell...n/photostream/
https://www.flickr.com/photos/jabell...n/photostream/
Did a few larger fast prints like this:
https://www.flickr.com/photos/jabell...n/photostream/
But e-steps were off a bit. Got that tuned, re-checked the PID on the hotend....
Test print from yesterday:
https://www.flickr.com/photos/jabell...n/photostream/
Much better! Still need to tweak on a few firmware settings, but it's shaping up nicely!
Do bed magnets deteriorate.
04-29-2024, 01:35 AM in General 3D Printing Discussion