Hello all and tank you for your time.

After upgrading my Anet E-10 with the E3Dv6 and Bltouch is start having blobs on corners.
Doenst matter if they are rounded or not.
It hapens on all the models I print.

I use Simplify3D.

Printing with Esun Pla (190 - 215 gives no change)
Nozzle 0.4
Nozzle height 0.2
Extrusion multiplier 1.0
Extrusion witdh 0.5
Retract 6mm @ 80mm/sec with bowden
Print speed: 40mm sec with outline reduction of 50%
Outline overlap 10%
Printing inside out or outside in gives no change
Force retract at layer change is off but gives no change when turned on
Upgraded the X-axis from a T-slot to a V-slot but no change there (E10 carriage wobble is now gone).

Can someone point me in the right direction?
If you need more info just let me know.

[img]http://i67.tinypic.com/2eygetz.jpg[/img]
[img]http://i65.tinypic.com/23rrdzt.jpg[/img]
[img]http://i66.tinypic.com/mh6n4h.jpg[/img]
[img]http://i66.tinypic.com/28m1o5k.jpg[/img]
[img]http://i65.tinypic.com/alt93o.jpg[/img]