Hello everyone,


I am totally new to 3D printing. I assembled a Tevo Tarantula and I followed some tutorials to make the first printing. D-Tech on YouTube, advices to print a cube (this one : https://www.thingiverse.com/thing:38108) as a first model, I used repetier-host and then Slic3r to create the g-code of the cube and then I tried to print the cube but here is my result : https://imgur.com/a/n5bRF



As you can see the cube is not smooth at all, it has some holes on the sides and I have absolutely no idea on what parameters I should modify to get a better result.


I used PLA Filament (1.75mm) at 195° and the heated bed at 60°, the infill has been set to 20% and the Filament diameter parameters in slicer is 1.75mm. Not sure what other informations I could give. If you guys have any advices, I'll take them.


I also uploaded the printing timelapse on YouTube (2x faster) : https://youtu.be/MaT8cB43qvw (Not sure this can help but who knows).