Close



Results 1 to 1 of 1

Thread: Heating problem

  1. #1
    Student lulu's Avatar
    Join Date
    Dec 2017
    Location
    Germany
    Posts
    1

    Heating problem

    Hey guys,

    i recently got my first 3d-printer, a Tevo Tarantula with two extruders. It's all assembled and kind of working.
    Every time i try to heat the hotend, it stops at a random point but always before my set temperature.
    Here is what i tried to do:
    Rewire the thermometers
    i tried to print something hoping it would heat up (the printer did the neccesary movements but did not heat)
    heat with the display and controler of the printer itself
    heat with my laptop via Repetier Server

    Every time it stops and can only start to heat up after i unplugged the printer. It also sometimes tells me "heater decoupled" out of nowhere.

    Can somebody help me with this?
    Last edited by lulu; 12-28-2017 at 04:56 PM.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •