Close



Page 7 of 11 FirstFirst ... 56789 ... LastLast
Results 61 to 70 of 104
  1. #61
    Hello guys we finally received the x-one2, assembled it all but at the time of printing, the printed doesn't recognize any gcode or stl files other than qidi's own. For example we tried to print https://www.thingiverse.com/thing:468651 this keycap here. but doesn't recognize any of the extensions and we tried qidi's own slicer and cura, we used the sd card, not even through the cable. Any idea?

  2. #62
    Should use .x3g. At least the Tech 1 does.

  3. #63
    Engineer
    Join Date
    May 2016
    Location
    Annapolis, MD
    Posts
    499
    I've got the QiDi Tech 1, no personal hands-on time with an X-one. Tech 1 uses X3G, not GCODE. There is usually a X3G converter application (like thingiverse GPX https://www.thingiverse.com/thing:81425 ) or a selection in the slicer.

  4. #64
    We've been printing successfully few keychain through usb, it prints pretty good, far better than the davinci by far, but we still haven't figured out how to print via sd card, but then again we only tried gcode and stl, and it seems not to be working, anyway my X-one is closed, it came with 3 plexiglass panels to mount, and we actually realized it's the X-one 2, so probably a refresh, or revision, but seriously so far so good, for ~430 it does a better job compared to a ~630 printer.

    http://i.imgur.com/DaTcriN.jpg

  5. #65
    Wow. Nice. You can't print .stl files. They need to be ran through a slicer and then converted to .x3g.

  6. #66
    Quote Originally Posted by number40Fan View Post
    Wow. Nice. You can't print .stl files. They need to be ran through a slicer and then converted to .x3g.
    We just managed to make the printer accept the file, by setting the printer "Julia" on cura, but it started printing completely random, we had to stop it, i'll try again with x3g, and see what happens.

  7. #67
    Engineer
    Join Date
    May 2016
    Location
    Annapolis, MD
    Posts
    499
    Please take and publish more pictures. This is the first and only info on this new version from QiDi that I've been able to find.

  8. #68
    Quote Originally Posted by DaveB View Post
    Please take and publish more pictures. This is the first and only info on this new version from QiDi that I've been able to find.
    I surely will, but it's 4:30 am here so i'll soon go to bed i'll probably do it tomorrow.

    Anyway the x3g converter looks a bit complicated to set, even because there's no accurate instructions, is there something easier to set you know about? Anyway i'll probably do everything tomorrow.

  9. #69
    Engineer
    Join Date
    May 2016
    Location
    Annapolis, MD
    Posts
    499
    Sorry, I use Simplify 3D. It performs the X3G conversion by invoking GPX. No idea what's going on under the covers.

  10. #70
    Quote Originally Posted by DaveB View Post
    Sorry, I use Simplify 3D. It performs the X3G conversion by invoking GPX. No idea what's going on under the covers.
    No idea on how to make it work on cura or the default qidi slicer? I mean, how does simplify3d invoke the converter? did you specify the directory of it or?

Page 7 of 11 FirstFirst ... 56789 ... LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •