Close



Page 6 of 13 FirstFirst ... 45678 ... LastLast
Results 51 to 60 of 130
  1. #51
    Technician
    Join Date
    Jul 2017
    Posts
    59
    Hello, what about the flashforge finder?

  2. #52
    No heated bed. Someone was on here within the last couple of weeks that just purchased one. He/she returned it.

  3. #53
    Technician
    Join Date
    Jul 2017
    Posts
    59
    Quote Originally Posted by number40Fan View Post
    No heated bed. Someone was on here within the last couple of weeks that just purchased one. He/she returned it.
    Basically no ABS? I understand, so better ignore it

    Anything pretty good around 500€? Not more than 550 possibly? And possibly on amazon?

  4. #54
    Even with PLA, having a little heat is nice.

  5. #55
    Super Moderator curious aardvark's Avatar
    Join Date
    Jul 2014
    Posts
    5,392
    qidi one: https://www.amazon.co.uk/QIDI-TECHNO...words=qidi+one
    Looks decent. Basically a finder, but with heated bed and cheaper :-)

    wanhao duplicator i3 plus: https://www.amazon.co.uk/Wanhao-3d-D...icator+i3+plus

    Good kit.
    Hell get an i3 plus and a he3d delta k200 kit and it'll still be cheaper than the qidi dual extruder :-)
    Actually for the 2 it would be almost exactly what your refund was. It's a sign !

    3d printers are like chocolate, one bar is good - but two is always better :-)
    Last edited by curious aardvark; 07-13-2017 at 10:48 AM.

  6. #56
    Technician
    Join Date
    Jul 2017
    Posts
    59
    Quote Originally Posted by curious aardvark View Post
    qidi one: https://www.amazon.co.uk/QIDI-TECHNO...words=qidi+one
    Looks decent. Basically a finder, but with heated bed and cheaper :-)

    wanhao duplicator i3 plus: https://www.amazon.co.uk/Wanhao-3d-D...icator+i3+plus

    Good kit.
    Hell get an i3 plus and a he3d delta k200 kit and it'll still be cheaper than the qidi dual extruder :-)
    Actually for the 2 it would be almost exactly what your refund was. It's a sign !

    3d printers are like chocolate, one bar is good - but two is always better :-)

    Any idea on how inferior is the x-one compared to the tech-1 ? I mean other than the extra extruder is it that much different?

  7. #57
    I think all of the rod sizes are different, 8mm versus 10mm, but that might be because of the extra weight of the dual head carriage.

    Edit: Nope, just looked and both are now made with 10mm rods.

    https://www.qiditechnology.com/ $629 on their website, not sure about shipping. The X-one shows out of stock.

    I don't see an enclosure on the X-one though.

  8. #58
    Technician
    Join Date
    Jul 2017
    Posts
    59
    Quote Originally Posted by number40Fan View Post
    I think all of the rod sizes are different, 8mm versus 10mm, but that might be because of the extra weight of the dual head carriage.

    Edit: Nope, just looked and both are now made with 10mm rods.

    https://www.qiditechnology.com/ $629 on their website, not sure about shipping. The X-one shows out of stock.

    I don't see an enclosure on the X-one though.
    Right, didn't notice it has no enclosure, it'd cost me 450€ which is pretty good. So basically the best among those, curious aardvark suggested, is the x-one

  9. #59
    I'd spring for the Tech 1 if you can. Later down the road when you start building more complicated models, you might need that extra extruder. Dual color prints. Dissolvable supports. PLA in one side, ABS in the other and you don't have to take the time to switch them out. Larger build volume. Enclosed already so you don't have to go looking for your own material to close in the sides. Getting away from manufacture specific software and filament will be the biggest benefit of either printer you choose.

  10. #60
    Super Moderator curious aardvark's Avatar
    Join Date
    Jul 2014
    Posts
    5,392
    you could easily enclose the x-one.

    I still like the wanhao & k200 combination :-)

Page 6 of 13 FirstFirst ... 45678 ... LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •