NEW M3D Promega

[MattSmith]

Has anyone looked into the newly releasing M3D Promega? It's available right now for less than $1200 and will retail for $3500. Thoughts?

http://sites.printm3d.com/promega.html

M3D Promega technical specifications:

• Build size: 15.3 in / 38.8 cm build (cube - 15.3x15.3x15.3)
• Printer Dimension: 20x20x22in / 50.8×50.8×55.8cm (cube)
• Weight: 25 lbs / 11.3 kg
• XY – 0.6 micron microstep resolution
• Z – 50-750 micron layer resolution (dependant on nozzle size)
• Up to 300mm/s motion (typical high quality printing at 45-60mm/s)
• Heats Up to 300°C (420°C with thermocouple add on)
• Connectivity: Ethernet with built-in Webhost
• USB host
• SD Card (for stand-alone mode)
• Print from any web-enabled device
• Runs off Gcode, sliced from STL and other 3D model file types
• Compatible with all 1.75mm filaments (not included with printer)
• Open electronics and hardware
• Open firmware (Smoothie or Reprap firmware)
• Open software (3rd Party Host Controllers)

(from: https://3dprintingindustry.com/news/...ations-116093/)