Close



Results 1 to 4 of 4
  1. #1

    Issue when trying to print

    Hi,

    I am trying to print any file, but everything I do, it is as if the home axes were offset. I have tried to reset the settings to default but it doesn't seem like anything is getting fixed. Does anyone know how to fix this issue?

    It is a MakerBot Replication 2X


  2. #2
    Super Moderator curious aardvark's Avatar
    Join Date
    Jul 2014
    Posts
    4,486
    oh right. check the endstop is:
    1) still where it should be.
    2) working.

    That's most likely the problem, the carriage is either not clicking the x-axis endstop or the endstop is not working.

  3. #3
    Student
    Join Date
    Mar 2016
    Location
    Düsseldorf
    Posts
    9
    Hi,
    I had the same problem.
    https://www.youtube.com/watch?v=SvZV-lnRtj0
    In my case the x-axis cable had a loose contact. It broke behind the metal pin.
    cable.jpg
    I was soldering the cable and now it works again, but you can als order a replacement cable.
    Cheers
    Thomas

  4. #4
    Technician
    Join Date
    Mar 2015
    Location
    Slovenia, Europe
    Posts
    76
    #fontseeker
    you have broken end-stop switch. Replace it and this problem will be fixed.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •