Results 1 to 8 of 8
Thread: Heated Bed Not Heating.
Threaded View
-
06-06-2016, 04:39 PM #1
- Join Date
- Jul 2014
- Posts
- 305
Heated Bed Not Heating.
I am assembling my new Pegasus 12" printer and I am also upgrading to PID control for the heated bed. Now I do have a Prusa IV3 12" with a PID controlled heated bed. So I have some experience with getting it to work.
I am following this thread: http://3dprintboard.com/showthread.p...-bed-relay-PID
But I cannot get my heated bed to heat. Right now PID is disabled in Marlin as I am attempting to pass the following command through S3D: M303 E-1 S100 C8. After that didn't work I attempted to heat the bed by turning it on in S3D, with no luck. After that I double checked all my wiring and used my multimeter to check for continuity between connections.
What am I missing? If need be I can provide an explanation of my wiring, but I literally followed the wiring on my already working Pruse IV3.
Update: I am not getting continuity across the +/- terminals on the heated bed.Last edited by BLKKROW; 06-06-2016 at 07:43 PM.
New to 3d printing looking for...
Yesterday, 12:56 AM in Tips, Tricks and Tech Help