Results 1 to 1 of 1
-
02-26-2016, 01:16 PM #1
- Join Date
- Feb 2016
- Posts
- 3
Qidi Tech first layer PLA problem
Hello
I'm new to 3d printing. Got a Qidi Tech I printer, have had good experience with it so far.
I am trying to print a new object with a raft, and during the very first layer it seems that there's a "wavy" pattern emerging.
Material PLA 1.75mm
Temp 200, bed temp 60
Using Slic3r
Things I tried:
- slow down the printing speed
- reduce the height of first layer
- increase and decrease bed and/or extruder temp
Please see images for the defect. It seems to self-propagate once it starts. Any ideas?
thanks
Do bed magnets deteriorate.
04-29-2024, 01:35 AM in General 3D Printing Discussion