Close



Results 1 to 9 of 9
  1. #1
    Engineer-in-Training
    Join Date
    Sep 2013
    Location
    San Diego
    Posts
    210

    Cool Anuvin's Print Journal and How To Megapost

    Hey there fellow backers, I decided I needed a place to post my prints and How to videos so they didn't end up all over the place. Let's start with build videos:


    Unboxing the V1 kit:


    Building the V1 printer:


    Building the standard drip system (highly recommended):


    So far, I am very pleased with how the peachy performs. It clearly has the capability to print highly detailed objects that would be nearly impossible for an FDM printer. Here is my first batch of prints from the peachy:












    I have also done a few print not from the print library, but I have just begun to play with the settings, so these prints are going to be much rougher for a while until I get Gcode figured out:

    1 cm cube (it is 1 cm high, but only 7 mm wide)


    d20 (lopsided, numbers didn't come through strongly, but perfectly full and no holes or problems otherwise, too big attempt to the right)


    I will be updating this thread as I print and film more peachy stuff, and I hope I can help with build questions for people who used my videos to build their peachy.

  2. #2
    Peachy Printer Founder
    Join Date
    Sep 2013
    Posts
    310
    Wow what a great post!
    You have done so much in just the first few days! Thankyou so much, Im sure thousands of people will benefit from your videos dew time.

  3. #3
    Engineer-in-Training
    Join Date
    Sep 2013
    Location
    San Diego
    Posts
    210
    Thanks Rylan! I wanted to try something simple and fun, so I tried a grumpy t-rex.
    Model : http://www.thingiverse.com/thing:637786






  4. #4
    Engineer-in-Training
    Join Date
    Oct 2013
    Posts
    219
    Anuvin

    Great prints. When I am up and running, I am going to try floating a thin layer of tap water on top of the resin. I have a theory that this might improve the layering..

  5. #5
    Have you got any videos of the prints?

  6. #6
    Student Fab's Avatar
    Join Date
    Jan 2016
    Location
    La Rochelle, France
    Posts
    14
    Anuvin, that's just awesome !
    What is your overall impression about the quality of these prints, and the "Peachy Printer experience" in general ?

  7. #7
    Quote Originally Posted by Anuvin View Post
    Thanks Rylan! I wanted to try something simple and fun, so I tried a grumpy t-rex.
    Model : http://www.thingiverse.com/thing:637786






    That's really awesome, I'm excited to see other's print with this thing.


    Quote Originally Posted by mike_biddell View Post
    Anuvin

    Great prints. When I am up and running, I am going to try floating a thin layer of tap water on top of the resin. I have a theory that this might improve the layering..
    I've also found the new MakerJuice resins specifically the Snap Fit drastically increases the smoothness of the prints.
    Last edited by Gavin; 01-29-2016 at 01:56 PM.

  8. #8
    Hi Anuvin.

    Have you been doing any more prints lately? Anything you can share with the group?

    /Martin

  9. #9
    Peachy Printer Founder
    Join Date
    Sep 2013
    Posts
    310
    For the 10 or so people out there that have V1 peachy printer kits This is a great Thread to refer to when building your printer.
    Anuvin was the first to build and print with a V1 kit, and he did an excellent job in documenting the process!

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •