Results 1 to 8 of 8
Thread: Printing tiny things
Threaded View
-
01-04-2016, 06:09 PM #1
- Join Date
- Jan 2016
- Posts
- 2
Difference between CAD and print (printing tiny things)
Hi all
I have a problem with printing tiny objects and need an advise on how to fix this.
Here's the thing:
After some tries I did a test print to check if my printer is even able to print small things. I made a cube with holes from 2-5mm in diameter in it. The 2mm hole has only 1.4mm, the 3mm hole ends up being 2.53mm. Only staring from 5mm the holes look fine. Can anyone tell me how to solve this issue?
Since I'm new to 3d printing any advise will probably help.
Slicing software: Simplify3D
Printer: Prusa i3
Firmware: Marlin
Filament: PLA 1.75mm
Print-Temperature: tested 190-210°C
Nozzle: 0.4mmLast edited by nurbs999; 01-05-2016 at 07:25 AM.
Do bed magnets deteriorate.
04-29-2024, 01:35 AM in General 3D Printing Discussion