Results 1 to 9 of 9
-
11-27-2015, 03:00 PM #1
Printing Disaster - Tell me what happened here (photos)
FlashForge Creator X Clone (MonoPrice Dual Extruder)
Simplify3D version 3.0.2
Temps: Extruder 190 / Platform: 60
Last edited by Ward; 11-28-2015 at 11:06 AM.
-
11-27-2015, 10:49 PM #2
Can you print it again without a raft?
-
11-28-2015, 07:48 AM #3
-
11-28-2015, 09:06 AM #4
Have you tried different nozzle temps ?
Remember that Indicated temp (displayed on printer) may not be the Actual temp at nozzle.
-
11-28-2015, 11:01 AM #5
Odd,
I took the blue painters tape off and reapplied 150mm wide Kapton tape.
The prints are now great...maybe fantastic ??
Only other thing I did was slow down the print speed. (I have a feeling THAT'S what really helped)
-
11-28-2015, 12:28 PM #6
A slower print speed makes a tremendous difference.
-
11-28-2015, 01:13 PM #7
-
11-28-2015, 01:28 PM #8
For PETG, I use 2550
For PLA, I use 2800
I might be able to go faster, but this works, and it works the first time, every time (making it faster in the long run).
YMMV
-
11-28-2015, 01:32 PM #9
Ender 3 Neo - Jam Problem
Yesterday, 12:39 PM in Tips, Tricks and Tech Help