Na it isn't really as bad, but the mods I make to my printers take time. Direct wiring the build plate power (+) directly to the power supply is most important. Do the math on this. 24v / 2ohm build plate. that is 12 amps flowing through a plug that on its best day is rated for 7 amps.

I've been wanting to put the adjusters on the outside corners for many moons. I don't have time to make the mod on this printer, but I want to switch to 4mm bolts for the levelers. The holes are 4mm and just need to be slightly enlarged and countersunk to allow 4mm bolts.

Quote Originally Posted by kaznad View Post
Thanks KludgeGuru!, I'll test it out later today.
Though there is not much topics in the Thingiverse Group, pinned it just in case.



Damn, that looks good. But it looks like a lot of work to get it disassembled though.