Close


Signup for our Free Webinar


Page 406 of 408 FirstFirst ... 306356396404405406407408 LastLast
Results 4,051 to 4,060 of 4073
  1. #4051
    Can you link me the bootloader and hex code?

  2. #4052
    Engineer
    Join Date
    May 2016
    Location
    Annapolis, MD
    Posts
    513
    Just got a tool that works unbelievably well for trimming chaff or sharps off the edges of prints. I had used them on aluminum chassis openings after nibbling away a few eons ago and forgotten how well they worked. If you don't have one give it a try. Well worth the cost. https://www.amazon.com/gp/product/B00004T828

  3. #4053
    Super Moderator
    Join Date
    Apr 2014
    Location
    KS
    Posts
    908
    Add jfkansas on Thingiverse
    Quote Originally Posted by write2dgray View Post
    Added to my project list - thankd DaveB!


    I recently discovered a couple of fanless power supplies that I had squirreled away for a different project which appear perfectly suited for this application (photo attached). I plan on swapping the stock one out at the same time for a very quiet solution .
    If you haven't figured it out yet, the QIDI and all Rep 1 clones use a 24v DC power supply.

  4. #4054
    Super Moderator
    Join Date
    Apr 2014
    Location
    KS
    Posts
    908
    Add jfkansas on Thingiverse
    Quote Originally Posted by DaveB View Post
    Just got a tool that works unbelievably well for trimming chaff or sharps off the edges of prints. I had used them on aluminum chassis openings after nibbling away a few eons ago and forgotten how well they worked. If you don't have one give it a try. Well worth the cost. https://www.amazon.com/gp/product/B00004T828
    Yep use them every day when cleaning up prints.

  5. #4055
    Nice find.
    I broke a few of mine that had wooden handles.
    I will pick this up.
    Finally getting to start printing again. Have my library setup and printer on the bench ready to go. It's been months.

    Quote Originally Posted by DaveB View Post
    Just got a tool that works unbelievably well for trimming chaff or sharps off the edges of prints. I had used them on aluminum chassis openings after nibbling away a few eons ago and forgotten how well they worked. If you don't have one give it a try. Well worth the cost. https://www.amazon.com/gp/product/B00004T828
    Editor in Chief
    Bitsonline

    Tips Appreciated But Not Expected
    BTC: 16wxHvKd3oU6SVjv6FrenqhkvRmc8t7sPy
    DASH: XqyaWxH896j9YeV1M35Gzb5gmRPmPbNDGq

  6. #4056
    Technologist cncartist's Avatar
    Join Date
    Mar 2016
    Posts
    168
    Add cncartist on Thingiverse
    Hey, how's everyone doing!? I've got one non-printer related question before I get into the good stuff.

    In the past I used to be able to receive private messages and now it seems I'm over my limit although I haven't received or sent any PM's in ~1 years time. I can't seem to find the limit listed anywhere and am unsure why I would not receive a notification since I'm seemingly ~100 PM's over the limit (I keep deleting them and now have less than 100 inbox+sent combined but there's still an error).

    I found this listed on the FAQ ( http://3dprintboard.com/faq.php?faq=...ivate_messages ):
    You will need to periodically delete old messages, as the administrator has probably set a limit to the number of private messages you can have in your folders. If you exceed this number, you will not be able to send or receive new messages until you delete some old ones.
    Can someone explain how I can find out what the number allowed for private messages is and why all of a sudden I seemingly can't use the PM system after a hiatus?

  7. #4057
    Technologist cncartist's Avatar
    Join Date
    Mar 2016
    Posts
    168
    Add cncartist on Thingiverse
    I've answered my own question, the number was changed to 40 Private Messages Inbox + Sent combined while I had ~4x that amount stored from last year.

  8. #4058
    Engineer
    Join Date
    May 2016
    Location
    Annapolis, MD
    Posts
    513
    New QiDi "X-One-2"
    http://imgur.com/DaTcriN.jpg
    It's now an enclosed chamber.
    Nothing on QiDi websites, no additional info from QiDi support. This is all I can find so far.
    Last edited by DaveB; 07-21-2017 at 10:56 PM.

  9. #4059
    Super Moderator
    Join Date
    Jun 2016
    Location
    Oklahoma
    Posts
    910
    I am hearing some stuff also. Trying to get more info.

  10. #4060
    Engineer
    Join Date
    May 2016
    Location
    Annapolis, MD
    Posts
    513
    Finally hunted down an X-One2 ad on Amazon UK. Not much additional info. https://www.amazon.co.uk/QIDI-TECHNO.../dp/B01IHHJ7R4

Page 406 of 408 FirstFirst ... 306356396404405406407408 LastLast

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •