Results 1 to 5 of 5
-
03-23-2015, 08:48 PM #1
- Join Date
- Jan 2015
- Posts
- 306
Looking for durable gloss coating for PLA
Hey, I bought Kryon Fusion with hopes it will protect my plastic from sun rays and weathering, my stuff is outside. It turns out that immediately after spraying PLA with Fusion the plastic becomes discolored. Scratch that stuff.
I got this other stuff, called Rustoleum painters touch 2X. It seems to go on without causing a reaction, but it isnt really glossy once it dries, and it starts to peel off with any sort of physical abrasion, it is not durable. I need something a little more reliable, I want it to go on and stay glossy without coming apart on me. Any suggestions?
-
03-24-2015, 10:59 PM #2
- Join Date
- Jan 2015
- Posts
- 306
I figured out why my gloss wasnt gloss, because the can says CLEAR MATTE. I cant read.
I bought CLEAR GLOSS today and in fact, it is gloss.
Intriguing.
-
03-25-2015, 11:16 AM #3
- Join Date
- Oct 2014
- Location
- Orlando, FL
- Posts
- 13
Have you tried or heard about XTC-3D?
http://www.reynoldsam.com/product/xtc-3d/
-
03-25-2015, 07:33 PM #4
- Join Date
- Jan 2015
- Posts
- 306
-
03-27-2015, 02:16 PM #5
- Join Date
- Feb 2015
- Posts
- 11
most likely you will have to spray unde coat or a primer base and then use what ever paint you want
Do bed magnets deteriorate.
04-29-2024, 01:35 AM in General 3D Printing Discussion