Results 1 to 7 of 7
Threaded View
-
01-29-2015, 03:16 AM #1
- Join Date
- Jan 2015
- Posts
- 9
larger or smaller prints then asked
hello,
i have another problem.
i have a step file that i convert in an STL file with two different drawing software one with NX en one with IDEAS.(same step file)
when i print these files i get a diffrent size of print, the print with STL file from NX is to big and the one with IDEAS is to small (see picture)
i print with leapfrog printer and PLA material.
i thought it was the shrink but that is not the problem is think.
someone any ideas
thanks
Do bed magnets deteriorate.
04-29-2024, 01:35 AM in General 3D Printing Discussion