This is quite a great application of 3D print, it extend the material limitation !!
Type: Posts; User: Magicolor
This is quite a great application of 3D print, it extend the material limitation !!
Looks really mix the false with the genuine!
Hi, Richard
I calibrate the left nozzle with a card, and the right nozzle is a little higher than the left one, about 0.1 mm higher, I judge it with eyes... and it works good.
When printing with...
I tried again, the printer did not speed up very much.
It seems that the firmware limited the top speed.
Advanced setting:
http://i.imgur.com/x2vWGqz.png
Printing video:...
http://imgur.com/gallery/amieGDE/new
http://imgur.com/gallery/IvwEFRr/new
I find that the main print speed in basic setting is not a absolute value for the whole printing,
let me change the...
3DPrintBoard resized my picture...
Sorry, aardvark
I‘m back. And I took three short videos of 200mm/s printing, please check them on Youtube:
https://youtu.be/zPEMH8YL7Tw
https://youtu.be/8jzT3F6ii-s
https://youtu.be/QUoQJx6kwm0...
Different slice setting tendency will lead to different results.
If you often print with solid infill objects, you will have a higher filament consumption.
If you cannot find a printer which meets all of your requirements, I suggest you give up the auto calibration feature.
After about 1 week printing and find the trick of manual leveling, you almost...
Yes, I mean for NinjaFlex filament printing, a over 70 mm/s speed is too fast.
For normal printing, the highest printing speed I have tried is 200 mm/s.
In the slice software I can set it up to...
Customization is fantastic
It seems not a easy to use printer...
Mankati Fullscale XT Plus is OK for NinjaFlex, but do not print with a high speed over 70 mm/s, or else, the thick melt filament will make the flexible filament curve in the filament tube,
this...
MakerBot didn't provide a flow setting in their MakerBot Desktop.
What is the roof and floor look like?
A photo of your print will be good for judgement.
Detailed answer.
Different adhesion methods require different technique.
If it is a glass build plate, and use Kapton tape, hair spray or 3M blue tape for good adhesion,
you can heat the plate...
Are you a military addictive and will sustained release weapon works?
So excite about it! :D
Looking forward to see your result!
Will you share the stl files in public?
To print with ABS and nylon, high temp hot end, hot bed, enclosed printer body are a must,
or else you can only print with very small objects.
So Wanhao D5S series are not for you,
they are not...
I can see that you really want a large build volume 3D printer,
consider Mankati Fullscale XT Plus,
260*260*300 mm, dual E3D V6 hot end,
high performance and reasonable price.
WANHAO D5S MINI seems fine, but I don't think the D5 is a good option,
it is too tall and there is no support structure in front of the frame,
I am afraid it shakes in printing process.
Why not...
BigRep, it is big enough for you.
I have purchased a print sample from Zortrax reseller, I have to say that it is really a good choice for high resolution printing!
But I did not buy it because of cost performance...
Here I...
I think Big Rigidbot and Mankati Fullscale XT Plus are two different directions,
Big Rigidbot was designed with many refit / DIY tendency, details like total open frame, many 3D printed parts,...
Hi, spaceman, I reply you in another thread.
I recommend you Mankati Fullscale XT Plus, 260*260*300 mm build volume,
300 ℃ dual E3D V6 extruders, full steel body, 110℃ heat bed, very solid...
As you mentioned large build area, E3D print head, filament compatibility, solid printer body,
I recommend you Fullscale XT Plus,
it is a large build size printer at 260*260*300 mm,
dual all...