Ive ordered a new extruder nozzle as the nozzle was blocked as well as having a defect on the tip meaning the plastic curled during print, will update when new nozzle is fitted
Type: Posts; User: RamJam
Ive ordered a new extruder nozzle as the nozzle was blocked as well as having a defect on the tip meaning the plastic curled during print, will update when new nozzle is fitted
Where can i change these settings?
Heres the video, sorry it took so long. As you can see its 4 minutes of the printer running then at the end you can see how much plastic has been extruded.
...
Yeh I inow it takes time, but what I mean is the printer is moving around and can see it moving up the z axis on the different layers but there isn't any extrusion because the gears are barely...
Okay I feel we are getting close, the printer homes correctly, and when set to extrude say 10mm, does so correctly, however when printing it extrudes extremly slowly, near not extruding? Any ideas ?...
Okay I've Disabled Max End stops in configuration h, which has now left me with only the min end stops when running a M119 Command. I can confirm that when i press the end stops, the state changes,...
What should i be seeing with my end stops in the configuration that they are? This is what i get when all are not activated and the axis mins change to open when activated. Is this correct for...
M114 command doesn't show me the end stop positions, However did some research and found that the M119 function shows me the end stop state.
Here are the results when the printer is in its idle...
Okay so printer moves in the correct axis now (+/- X,Y,Z) when operated manually in the program.
Using PronterFace, when i press the Home axis Button on X and Y they move towards the Limit...
Ive tested the motors using PronterFace, each motor moves, extruder extrudes and heatbed heats up as required, Looking at the front of the printer the motors move using PronterFace in the following...
Hey Guys
The printer I inherited has now been completely rewired, and is ready to be calibrated, However my knowledge of this step is next to none :(
What are the steps i need to take to ensure...
Cheers for the replies, been a massive help! :)
Hello all,
New here so hope ive posted this is the correct place.
Bit of a backstory (Sorry). I've obtained a 3D printer from a friend, however it wasn't working, so ive needed to repair it....