Search:

Hi all, I really hope someone can help me.

So I got a Pegasus 12 with dual extruder and I have a prox switch setup on my extruder carrier.
So far the prox switch works (LED turns on and off...

Sorry my reply was late.
Here is my folder with the parts I created so far for my pegasus 12.
https://drive.google.com/open?id=0B-WgWOYb3EBFaC1rQmdEWkpLT28

the 20mm adjustable mount goes along...

I will post that later today.
I have to make a revision to it to allow the allen key to go through freely to tighten the screw on the bearing carrier.

I had asked Collin originally if the...

Well I'm actually just about to do that.
For some reason the bearing carrier that pushes the filament against the extruder gear snap one of the tooth that guides the filament.
So far I'm having a...

I actually thought of using couplers instead of the tubing, just because vinyl tubing looked inappropriate for the job, but it's been fine for me so far.
If I may suggest to use these:...

I am finally done with it.
I did take my time and I did run into the same issue as you with the hidden nut haha. I ended up buying a pack of 25 drop in T-nuts after that just in case. :o
Aside of...

Have you considered a Makerfarm Pegasus 12"?
It's all extrusion 20x40 frame, 11.5x12x13 build capacity, heated bed, LCD display, etc... for just about $1K.
I purchased mine with dual E3D V6 hot...

Hello all!

I recently purchased a Pegasus 12 kit with dual E3D V6s and I am about to start the build in the coming few days.
I followed the list of items to get from Makerfarm and I got pretty...

catching on this thread a bit late.
I just purchased a Makerfarm pegasus 12" with dual E3D hot ends. It came up to just about $1K. 12x12x13 build volume and seems pretty good. My reason for moving...

Well I'm finally getting rid of my Da-Vinci 1.0 for one of these bad boys.
Spoke to Colin and I will be doing a dual E3D V6 as I have been keen on printing more complex parts.
Printer should get...

Sounds like a viable option.
I actually just stumbled upon a company called Colido that seem to have something very similar.
http://www.colido.com/wp-content/uploads/2016/01/ABS-PLA-Blue-1KG.jpg...

Thanks guys.
The 3D solutec looks like the one on the right that I just got. It's very light.
The one from meltink looks like hybrid between the one on the left and the middle one. It's a bit...

Hello all,

I have been using some XYZ light blue ABS for a while and it seems the color is now discontinued.
Would any of you know of an ABS filament 1.75mm with a color close to the one shown...

Hey there Marm,

I suggest you get yourself this little gizmo from wctek
http://www.wctek.com/shop/da-vinci-3d-printer-accessories/15-xyzpro.html
This lets you control your cartridge specs as...

Well, in my case I only use a thin layer of elmer's purple glue stick and it doesn't stick too much .
The best thing is to wait for it to completely cool down and it usually pops right out.
Now...

I've always been amazed by how far NASA has been pushing the envelope of space exploration, but was the budget cut that bad? brown packing tape as sealant and 4 year old flip video cameras?
I...

Any error message on your Da-Vinci's screen?
Any issue with the cartridge filament?
I've been printing with mine for a while and printed parts well above that.

Chocolate printing hu :rolleyes:.
I need to show this to my wife, that sounds just like an excuse to buy another printer hahahah.

- What is the most interesting thing you have seen done with a 3D printer or 3D printing technology?

The most interesting things I have seen done with a 3D printer are parts that are mechanically...

I have mine running on third party filament.
I'm actually going to get rid of all of my XYZ filament because they quality of their filament is a bit disapointing.
I get quite a few bubbles and the...

Being a hypochondriac that is just freaky to me.
I wish him success in his recovery!

You are absolutely right, I just wanted to know if anyone had done it before. I don't want to take my head apart without guidance.
My friend who owns the same printer did it and his printer hasn't...

Hi all,
I am currently experiencing with non XYZ filaments on my Da-Vinci and I've been pretty successful so far, except for one type of filament: Translucent.
It seems the printer head has some...

Really cool man,
So what's the goal exactly, you are looking to build them on demand?
I'm actually going to look into something similar for my Da Vinci 1.0.
Using extruded profile was a smart...

No lace! that sounds like boring foreplay to me.... lol
The underwear looks good though, reminds me of the little mermaid clam bra hahah.