FINALLY IT ALL WORKS !!!! it's printing like normal! thank-you thank-you thank-you so much my friend !! im making test prints as it :Dhttp://3dprintboard.com/attachment.php?attachmentid=5085&stc=1
Type: Posts; User: avggrech
FINALLY IT ALL WORKS !!!! it's printing like normal! thank-you thank-you thank-you so much my friend !! im making test prints as it :Dhttp://3dprintboard.com/attachment.php?attachmentid=5085&stc=1
finally it works i just have one problem left. now when i try to print something it heats up as it hits the 150 degrees on the head the extruder just goes crazy starts pulling back the filament spits...
using the current firmware i get it to move using the lcd or trough cura but the extruder doesn't work as-well (i have gave it a shot normally i use Repetier host).Repetier host gives those issues i...
so i had a Melzi board that got fried some how i use to run that using Repetier host. now i have a ramps 1.4 obviously with the use of an arduino mega. i have no driver installed i didnt know i had...
Thing is it says connected but than whatever i do it just stays "command waiting"http://3dprintboard.com/attachment.php?attachmentid=5058&stc=1 ...
the problem is uploading the g code. as you can see from the screen shot it doesn't want to send it. i have also made a test g code with the M92 X350 command to test but it has not doen anything...
You are right to do so. I have isolated the motor and also the driver and they work fine. They just do not work when in the extruder place.
I have tried that and failed. I have tried to print an object with the correct temperature but still no extrusion. I have just noticed that in the configuration on the LCD, it says that the extruder...
i have a big problem with my printer i cant get it to print. the printer works and moves all the axis but the extruder motor just doesn't want move . i have connected the motor to other axis and it...
yes i heated the hot end as suggested up to 210
yes ist very similar to pursa i3 , i have got it to work as in print something from the sd card but i still cant get it to move the extruder motor. ive attached the configuration.h from my marlin,...
hello 3D-printing people im a programmer but new to editing code for my firmware, i had a melzi board but it broke and i bought a new board , a rams 1.4 from eBay. im trying to get the code to work...