Well...
I always use our default recipes, with the fan off for the first five layers and then on at 50% (this is 20% in the slicer config for some reason) for the rest of the print.
However,...
Type: Posts; User: Davo
Well...
I always use our default recipes, with the fan off for the first five layers and then on at 50% (this is 20% in the slicer config for some reason) for the rest of the print.
However,...
rd_3d,
For ABS, we use Prime: 250 Steps, 50 ms and Unprime: 250 Steps, 60 ms.
Note that the delay in ms is how long until the extrusion rate of the next move is applied (which is 0 for...
I don't know which X00 microns profiles you're referring to.
The Z.2 S1800 profile is for 0.2mm (200 micron) layers, 35% honeycomb infill, 30mm/sec movement (hence S1800 - 1800 mm/min).
Let me...
For Print, use HYREL Z.2 S1800 noSprt
For Filament, I prefer HYREL ABS 230c Fan 50%
Those are the recipes we use for all the things that we print in ABS.
Let me know how I can help.
Hi RD_3D.
For a 1mm extrusion width, you should have a larger nozzle- do you? Or are you over extruding from the .5 to make a 1mm wide path?
I dont know what version of Repetrel and firmware...