Agreed. If you look around the cutout in the picture of the print it looks like the hotend is being dragged through the plastic. What's weird is that I have been using the same profile for ages. I...
Type: Posts; User: lovincup
Agreed. If you look around the cutout in the picture of the print it looks like the hotend is being dragged through the plastic. What's weird is that I have been using the same profile for ages. I...
Yes, this is one of my theories, That's why I was thinking perhaps the gears might have warped or worn out causing inconsistent extrusion, or excess pressure built up due to partial blockage.
Thanks guys,
@Chadd - yes I can see it happening but I cannot figure out why. Going to look more closely as I work through it.
@Roxy - good thought as it seems shorter runs are less susceptible...
i3v 10, ABS @ 225, E3Dv6 .35, 3mm Filament, bed @ 100, Simplify 3D
Greetings Farmers,
Recently I have been getting these weird "ripples". Any ideas?
The first layer went down perfectly,...
You aren't by chance using a powerstrip that popped it's protection?
Both the Makerfarm wooden and aluminum groove mount are a little too thin to provide adequate contact between the top of the e3dv6 and the recess in the bottom of the accessible extruder. The result...
(sorry off topic) You mention Touchscreen....While mine isn't as fun, and after trying the Rasberry Pi\Octopi, I have opted to use my Dell Venue 8 pro tablet with Repitier Host. I also have...
Thanks guys,
A friend of mine had some of the thick plexi kicking around that he donated to me. It's scratched but it's the expensive stuff so I figured I would try and buff it out with some plexi...
Hello fellow Farmers, long time lurker first time poster...Here is my attempt at a wife friendly fume enclosure. I used the respirator cartridge/Fan method to "scrub" the air. It works really well. I...