MK-1 Tool
The MK-1 is a modular, hot-swappable head which prints 1.75mm filament at up to 250°C.
Validated Materials:
Printable View
The EMO-25 Tool
The EMO-25 is a modular, hot-swappable head which prints in any pasty extrudable which is printable at room temperature (with a consistency between mayonnaise and peanut butter).
Validated Materials:
- 3P QuickCure Clay https://www.3pquickcureclay.com/ (polyerizes with heat gun or lighter (or laser))
- Clay http://www.youtube.com/watch?v=trdz4YDbdsw (may require firing after printing)
- FIMO http://www.staedtler.com/en/products...-and-crafting/ (requires baking after printing)
- Metal Clay, including Precious Metal Clay (PMC) (requires firing after printing)
- Porcelain (requires firing after printing)
- Plasticine http://www.youtube.com/watch?v=cw8XiW46G0k
- Play-Doh http://www.youtube.com/watch?v=dihvAQR7LQg
- Sculpey http://www.sculpey.com/ (requires baking after printing)
- Sugru (self-setting rubber) http://www.youtube.com/watch?v=nuii5rP53Js http://sugru.com/
- RTV Silicone http://en.wikipedia.org/wiki/RTV_silicone
If you have suggestions of material for us to test, please let me know.
The COD-25 Tool
The COD-25 is a modular, hot-swappable head which prints in resins at room temperature; we photoinitiate crosslinking as we dispense.
Validated Materials:
If you have suggestions of material for us to test, please let me know, along with the wavelength for crosslinking.
The MK1-450 Tool
The MK1-350 is a modular, hot-swappable head which prints 1.75mm filaments at up to 450°C
Validated Materials:
The KRA-15 Tool
The KRA-25 is a modular, hot-swappable head which prints in any pasty extrudable which is printable at up to 150C
Validated Materials:
- Waxes
- PCL (Polycaprolactone) https://en.wikipedia.org/wiki/Polycaprolactone
- 3M Scotch Weld 3796 Hot Melt Adhesive https://www.3m.com/3M/en_US/company-...4747588&rt=rud
If you have suggestions of material for us to test, please let me know.
Added PEEK for the MK1-350.