Close



Page 2 of 3 FirstFirst 123 LastLast
Results 11 to 20 of 21
  1. #11
    3DPrintBoardPro Member car3less's Avatar
    Join Date
    Oct 2014
    Location
    Bucuresti
    Posts
    109
    Follow car3less On Twitter Add car3less on Facebook Add car3less on Shapeways
    Felt inspired by the thread and finally had some time to make my own business cards
    Half printed, half laser cut and engraved.

    I printed the frame with frosty white ABS and tried to design it with rails on the sides so I could easily change the ornament on it (the flower and the gears) or the acrylic part inside. The ornament has a support that slides on the rail. Image attached.

    3d printed business cards.jpg
    Printare 3D Bucuresti

    Any sufficiently advanced technology is indistinguishable from magic. Arthur C. Clarke

  2. #12
    Super Moderator curious aardvark's Avatar
    Join Date
    Jul 2014
    Posts
    8,818
    is it me or has this thread become somewhere to just advertise your business while pretending to be an actual forum member ?
    Nah it's not just me :-)

  3. #13
    Super Moderator curious aardvark's Avatar
    Join Date
    Jul 2014
    Posts
    8,818
    Quote Originally Posted by car3less View Post
    Felt inspired by the thread and finally had some time to make my own business cards
    Half printed, half laser cut and engraved.

    I printed the frame with frosty white ABS and tried to design it with rails on the sides so I could easily change the ornament on it (the flower and the gears) or the acrylic part inside. The ornament has a support that slides on the rail. Image attached.

    3d printed business cards.jpg
    those are brilliant !
    You do very appealing work :-)

  4. #14
    Or 3D print your own business card...

    CP3D bizcard.jpg

  5. #15
    Super Moderator Roxy's Avatar
    Join Date
    Apr 2014
    Location
    Lone Star State
    Posts
    2,182
    Quote Originally Posted by curious aardvark View Post
    is it me or has this thread become somewhere to just advertise your business while pretending to be an actual forum member ?
    Nah it's not just me :-)
    You don't mean Car3less, right? (That is who's post you ended up after...)

    Is this the same person as in this thread?

    https://github.com/fmalpartida?tab=activity

    I'm bad with faces. But if it is the same person... She deserves to get cut a lot of slack here!
    Last edited by Roxy; 06-02-2015 at 11:22 PM.

  6. #16
    Super Moderator curious aardvark's Avatar
    Join Date
    Jul 2014
    Posts
    8,818
    oh hell no not car3less - There are a bunch of posters with 1 or 2 posts who say: 'I bought cards from these people'.
    And we're expected to believe they're not from the company itself :-)

  7. #17
    3DPrintBoardPro Member car3less's Avatar
    Join Date
    Oct 2014
    Location
    Bucuresti
    Posts
    109
    Follow car3less On Twitter Add car3less on Facebook Add car3less on Shapeways
    thanks I needed them 2 weeks ago for a 3d printing conference in Abu Dhabi, that was canceled in the end. Lucky me, because I had time to print only 2 business cards

    No one could see them. So... as there were not too many printed business cards around here I said to share. ))
    Printare 3D Bucuresti

    Any sufficiently advanced technology is indistinguishable from magic. Arthur C. Clarke

  8. #18
    3DPrintBoardPro Member car3less's Avatar
    Join Date
    Oct 2014
    Location
    Bucuresti
    Posts
    109
    Follow car3less On Twitter Add car3less on Facebook Add car3less on Shapeways
    francfalco
    what is the size of the letters on the business card?

    Roxy
    you are very bad at faces. need more pictures of me? :P
    Printare 3D Bucuresti

    Any sufficiently advanced technology is indistinguishable from magic. Arthur C. Clarke

  9. #19
    [QUOTE=car3less;59629]francfalco
    what is the size of the letters on the business card?

    smallest letter cap height is about 7mm

    That card is the first test - printed at 0.2

    I've also printed at 0.06 and slow, remove the noticeable stepping completely, but i'll need a smaller nozzle to get the letter faces any sharper

  10. #20
    3DPrintBoardPro Member car3less's Avatar
    Join Date
    Oct 2014
    Location
    Bucuresti
    Posts
    109
    Follow car3less On Twitter Add car3less on Facebook Add car3less on Shapeways
    they look nice. I tried to print some text with 5mm height, but didn't go so well.
    Printare 3D Bucuresti

    Any sufficiently advanced technology is indistinguishable from magic. Arthur C. Clarke

Page 2 of 3 FirstFirst 123 LastLast

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •