Close



Results 1 to 3 of 3
  1. #1

    Question Problem with Makerbot Replicator 2 and Sketchup exporting .stl

    Hi as the topic says i have problem exporting model from sketchup to .stl and i'm using the official plugin..
    Look at my pictures to see my problem..

    sketchup.jpg 1 st picture is how it looks in Sketchup
    makerbot1.jpg 2 nd picture is how it looks when loaded into makerbot desktop

    printpreviewandresult.jpg 3 rd picture shows it in the print preview and this is the result when printed

    What is causing this error ? It seems to occur at random places and even in very uncomplicated designs !!

    // Cheers

  2. #2
    Looks like the slicer is having problems with some of the geometry. Run the STL file through the netfabb cloud repair service before you load it into makerbot desktop.

    https://netfabb.azurewebsites.net/

  3. #3
    3dkarma, thank you for the reply.
    Will try it very soon !!

    Cheers !!

    EDIT: Worked like a charm =)
    Last edited by Basseman; 11-25-2014 at 04:51 PM.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •