Hictop using K3 Bed

[Roberts_Clif]

I am posting my Hictop 3DP12 3D Printing on a Anycubic Kobra 3 smooth bed surface.

https://drive.google.com/file/d/19rX...a0JKkb7F8/view

Try it you will like it. This Spring steel bed is quite a bit larger than the original bed.
I centered it between the frame clipped it onto bed and started my normal nozzle height adjustments and printed.

https://3dprintboard.com/attachment....1&d=1737212230

Note that even the bed texture transferred to my model. Another benefit was the Spring steel bed was leveler than the original ever was