Results 1 to 2 of 2
-
10-30-2024, 02:51 AM #1
- Join Date
- Oct 2024
- Posts
- 5
Why my printer leaves small lumps/bits on surface
I have printed a bed levelling square to demonstrate the things which I want to explain. The surface of my parts is always having small bits/lumps of materials?
Is it problem with material flow rate? My ultimaker 2 plus asks value for material flow rate in %, what should be the value?
P.S.- I have tried levelling the build plate but it's not the solution to my problem I believe. Thanks
-
10-30-2024, 04:12 AM #2
- Join Date
- May 2020
- Posts
- 688
A picture of the bed leveling square would help to see the surface. The 'Z' offset might need adjusting in the slicer settings.
I don't use Cura, however a guess of 100% is a figure to start from and adjust in small increments.
Orca, Bambu and Prusa slicers use the figure of '1' as a starting point, a flow rate setting might be between '0.95' and '1'
layers start moving
12-01-2024, 07:41 PM in Tips, Tricks and Tech Help