How do I print a temp tower?

[Cylonmode]

Do I have to just find the .stl and print away or do I have to set the temperature manually on each row in the slicer before printing?

[Roberts_Clif]

If using an STL file you will need to set correct temp at the designated spot. If not then I have been doing it wrong for a long 8 year time period. As STL files do not contain configurations for temperature settings, and using Pre sliced G-Code could give you undesirable results.

[Bikeracer2020]

There is a ready made adjustable temperature tower in the calibration menu in Orcaslicer

[Cylonmode]

Perfect! Thank you both. Gotta love Orcaslicer, I had no idea that was in there.