Results 1 to 4 of 4
Thread: How do I print a temp tower?
-
10-12-2024, 07:58 AM #1
How do I print a temp tower?
Do I have to just find the .stl and print away or do I have to set the temperature manually on each row in the slicer before printing?
-
10-12-2024, 09:01 AM #2
If using an STL file you will need to set temp correct temp at the designated spot.
If not then I have been doing it wrong for a long 8 year time period.
As STL files do not contain any temperature settings, and using Pre sliced G-Code could give you undesirable results.
-
10-12-2024, 09:21 AM #3
- Join Date
- May 2020
- Posts
- 685
There is a ready made adjustable temperature tower in the calibration menu in Orcaslicer
-
10-12-2024, 09:48 AM #4
Perfect! Thank you both. Gotta love Orcaslicer, I had no idea that was in there.
Kickstarter campaing LEGENDARY...
Today, 01:32 AM in Free Self Promotion