Close



Results 1 to 4 of 4
  1. #1
    Student Cylonmode's Avatar
    Join Date
    Aug 2024
    Location
    Waco, Texas
    Posts
    3

    How do I print a temp tower?

    Do I have to just find the .stl and print away or do I have to set the temperature manually on each row in the slicer before printing?

  2. #2
    Staff Engineer Roberts_Clif's Avatar
    Join Date
    Jun 2017
    Location
    Washington State, USA
    Posts
    1,168
    Add Roberts_Clif on Thingiverse
    If using an STL file you will need to set temp correct temp at the designated spot.

    If not then I have been doing it wrong for a long 8 year time period.
    As STL files do not contain any temperature settings, and using Pre sliced G-Code could give you undesirable results.

  3. #3
    Super Moderator
    Join Date
    May 2020
    Posts
    686
    There is a ready made adjustable temperature tower in the calibration menu in Orcaslicer

  4. #4
    Student Cylonmode's Avatar
    Join Date
    Aug 2024
    Location
    Waco, Texas
    Posts
    3
    Perfect! Thank you both. Gotta love Orcaslicer, I had no idea that was in there.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •