Results 1 to 3 of 3
Thread: Cura slicer issue
-
09-13-2024, 02:25 AM #1
- Join Date
- Sep 2024
- Posts
- 3
Cura slicer issue
Hello,My cura slicer keep showing this up: "failed to load. The file could be corrupt, inaccessible or it did not contain any models." How do i go about solving this issue? Any advice is appreciated!
geometry dash breezeLast edited by kennethpyle; 09-22-2024 at 02:05 PM.
-
09-13-2024, 02:40 AM #2
- Join Date
- May 2020
- Posts
- 672
Try a different file to see if it will load.
-
09-13-2024, 02:44 AM #3
- Join Date
- Sep 2024
- Posts
- 3
Thanks for your answer. I will try
Need to design a thumb ... do cad...
10-05-2024, 02:49 AM in 3D Modeling, Design, Scanners