Results 1 to 1 of 1
Thread: 2nd extruder dragging
Threaded View
-
07-18-2024, 02:42 PM #1
- Join Date
- Sep 2015
- Posts
- 3
2nd extruder dragging
I have a MakerBot Method X and when I tried my last print I found that the second head was dragging across the material and dislodging it. I’m printing with Nylon Carbonfiber 12 with no secondary support. I’m using a breakaway support since the part is very simple so the 2nd head is not used. I tried reseating the 2nd injector but no change.Does anyone have any ideas?Tom
Ender 3v2 poor printing quality
10-28-2024, 09:08 AM in Tips, Tricks and Tech Help