Results 1 to 3 of 3
Thread: Brand new to this
-
02-25-2024, 12:28 PM #1
- Join Date
- Feb 2024
- Posts
- 3
Brand new to this
a good friend of mine has an LD-002H, and a set of circumstances has led to him not going to have a use for it for a while, and he brought it over to my place for me to learn to use. I am brand new to this, and am hoping to learn the ropes well enough to make some useful stuff. I would love some pointers as far as how to get started. We printed a little 3D business card, and that's the extent of my experience so far. I'd love some links to 101 threads in here and good videos to watch to get started, cause the whole thing is kinda intimidating intimidating to be honest. I've done CNC lathe work in the past so I have a concept of computer driven manufacturing, but I know this is different than thatThanks for any ideas and I look forward to this being the new way that I spend my free time (-:Jono
Last edited by jonohoff1988; 02-25-2024 at 12:36 PM.
-
02-25-2024, 01:23 PM #2
- Join Date
- May 2020
- Posts
- 685
Loads of info on YouTube.
Teaching Tech
Makers Muse
CNC Kitchen
Thomas Sanlandera
3D Printing Nerd
and many more. Just search 3D printing.
-
02-25-2024, 04:02 PM #3
- Join Date
- Jun 2014
- Posts
- 892
From what I see online, it's a resin printer. Take seriously the health considerations when using. The vapors from the resin can damage your lungs. The worst aspect of this is that it takes time to develop symptoms and by then, it's too late. Use VOC type filtration in the mask and keep the work area ventilated as much as possible. If you can smell the resin vapor, you're in danger.
Carbon Fiber Filament...
Today, 04:58 PM in 3D Printer Parts, Filament & Materials