Results 1 to 2 of 2
Thread: QIDI X-Max 3
-
09-19-2023, 10:45 AM #1
- Join Date
- Aug 2023
- Posts
- 2
QIDI X-Max 3
While printing the infill it starts to "clump" then the filament stops coming out
-
09-19-2023, 12:26 PM #2
- Join Date
- May 2020
- Posts
- 542
You could perhaps email and start a dialogue with Qid, they usually try and help.
may@qd3dprinter.com
Top Layers are not completly...
11-28-2023, 06:26 PM in Tips, Tricks and Tech Help