Results 1 to 4 of 4
Thread: Help with boolean difference
-
03-24-2023, 06:15 PM #1
- Join Date
- Mar 2023
- Posts
- 1
Help with boolean difference
Hi,Im trying to use half of the attached meshes to make an imprint on a surface (like a chocolate box). I struggle to get it to work though. Have tried Boolean Difference inh Meshmixer and Blender, but does only pruduce non working results.Thanks for your help!Martin
-
03-24-2023, 08:33 PM #2
- Join Date
- Jun 2014
- Posts
- 892
I selected the Queen component, then performed a plane cut and aligned the cutting plane to the monolith. On execution, I selected both components and performed Combine. The result is attached. There was one flag within Analysis>Inspector but selecting it for repair did not cause any apparent damage. Hope this helps.
-
03-24-2023, 08:34 PM #3
- Join Date
- Jun 2014
- Posts
- 892
Okay, that was WRONG. You're asking for the difference and I did a combine. Sheesh. I'll get back on it in the morning.
-
03-25-2023, 09:28 AM #4
- Join Date
- Jun 2014
- Posts
- 892
Now that I'm awake, I used Fusion 360 to import both meshes, used Mesh/Modify/Combine and created the attached file. It passes Meshmixer's Inspector.
Hope this is what you wanted. If not, let me know where the misunderstanding lies.
layers start moving
12-01-2024, 07:41 PM in Tips, Tricks and Tech Help