Results 1 to 2 of 2
-
11-03-2022, 02:12 PM #1
- Join Date
- Nov 2022
- Posts
- 1
Hydrophobic coating for SLS polyamide 12 (Nylon 12) parts
Hi guys!My name is Manuel Pinto and I´m a mechanical engineering student and I´m finishing my master's degree.I have parts printed through EOS powder (PA 12). Now I need a "waterproof" coating. I know that is possible to achieve it but there is no much information on internet about it...Can anyone help me?Greeting from Portugal!
-
11-28-2022, 10:44 AM #2
Nylon 12 is pretty waterproof on it's own, but it can be finished in a number of ways, depending on how you will use it. We run a 3D printing business specializing in 3D printing Nylon 12 (www.tempus3d.com) and we have found that you can paint the parts yourself if they are not going to be used in a high-wear environment (for a cheap option). you can also send teh parts to a 3D printing service to have them vapor-fused (a chemical process that smooths and seals the outside) or fins a place that does a more industrial paint finish like Cerakote.
Good luck with your project!
Need Cura Profile for Tronxy Moore...
12-05-2024, 05:55 AM in 3D Printing Slicer Discussion