Results 1 to 3 of 3
-
09-28-2022, 12:26 AM #1
Adventurer 3 Pro - Print Infills are Nothing but Strings
I've been printing for weeks with little issue. The past couple of days have been another story. My print infills basically aren't sticking and are just becoming strings. I've re-calibrated, adjusted temp/speed/layer height. Nothing I do seems to fix the problem. What is happening? Any help would be much appreciated!!
-
06-07-2023, 01:20 PM #2
- Join Date
- Jun 2023
- Posts
- 2
Try this
I have not had that exact issue but I have had the string effect in various parts of print jobs. Use the unclogging tool that came with the printer to unclog the nozzle. Once this is done let it cool then remove the nozzle. Check around the end, you will probably find blobs of filament stuck around it. Remove these CAREFULLY then reinsert the nozzle and do a test print.Fixed it for me
-
06-26-2023, 07:28 PM #3
- Join Date
- Jun 2023
- Posts
- 3
Partially clogged nozzle.
What is the best material type for...
12-06-2024, 01:16 PM in General 3D Printing Discussion