Results 1 to 3 of 3
-
09-02-2022, 02:33 PM #1
- Join Date
- Sep 2022
- Posts
- 2
Not all lines of STL are printing
I am new to #D printing and I am having an issues I just don't understand. I have a 2D drawing that I have made into an STL. It imports into TinkerCad just fine, and exports an an STL just fine. I can bring that into Cura without an issue, but when I slice it and preview, it shows all of the parts, but not all parts will show as printing when I move up the layers. (and that proves to be correct when I actually print the file)I am attaching the picture, the .stl and the gcode file if anyone wants to take a stab at why this might be happening.
Last edited by galefulton; 09-02-2022 at 02:33 PM. Reason: misspelling
-
09-02-2022, 03:21 PM #2
- Join Date
- May 2020
- Posts
- 689
Sliced it in Prusa slicer and it comes up ..... auto repaired 6636 errors
Perhaps try Prusa slicer, I've only just started using it and I really like it.
-
09-02-2022, 03:48 PM #3
- Join Date
- Sep 2022
- Posts
- 2
I will give it a try, than you.
layers start moving
12-01-2024, 07:41 PM in Tips, Tricks and Tech Help