Close



Results 1 to 4 of 4
  1. #1

    how to fix this problem

    I am a beginner with 3d printing. I have creality ender 3 s1. I am posting a photo. Please help!

  2. #2
    Staff Engineer Roberts_Clif's Avatar
    Join Date
    Jun 2017
    Location
    Washington State, USA
    Posts
    1,153
    Add Roberts_Clif on Thingiverse
    It appears you have a visible seam, this can be fixed by selecting a random seam.

  3. #3

    still a problem

    with random seam it is not a line but still bumps..
    Attached Images Attached Images

  4. #4
    Staff Engineer Roberts_Clif's Avatar
    Join Date
    Jun 2017
    Location
    Washington State, USA
    Posts
    1,153
    Add Roberts_Clif on Thingiverse
    Now that we can remove the obvious, it could be determined that one or two other solutions could be tried.

    1: you could be experiencing over extrusion you could reduce the flow rate and see if this eliminates bumps.

    2: you could have moisture in filament, placing a dollar store Charcoal Moisture Eliminator in your filament storage container could help.
    Drying filament could be needed the best way to eliminate moisture is by using a food dehydrator
    Last edited by Roberts_Clif; 09-15-2022 at 08:57 AM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •