Close



Results 1 to 3 of 3
  1. #1

    Help with print settings for ASA

    Hello, I am trying to print with ASA for the first time and having problems getting the desired result. I'm using
    • Dynamism ASA 2.85mm
    • Ultimaker 3 (I don't have any type of enclosure)
    • Latest version of Cura Using the CURA preconfigured "FINE" settings
    • With the following changes
    • Print Temp - 250f
    • Bed Temp - 80f
    • Print Speed - 40mm/s
    • Cooling - Off
    • Infill - 100%
    • Also using Magigoo original



    • Here is what I am trying to printDesired Result.jpg
    • Print is not flat, it's warped upwards.IMG_4901.jpg
    • The structure at the back of the print is misalignedIMG_4902.jpg
    • Please help suggest what I should change in my settings.
    Last edited by dudical26; 04-21-2022 at 07:15 AM.

  2. #2
    Super Moderator
    Join Date
    May 2020
    Posts
    595
    Quote Originally Posted by dudical26 View Post
    Hello, I am trying to print with ASA for the first time and having problems getting the desired result. I'm using
    • Dynamism ASA 2.85mm
    • Ultimaker 3 (I don't have any type of enclosure)
    • Latest version of Cura Using the CURA preconfigured "FINE" settings
    • With the following changes
    • Print Temp - 250f
    • Bed Temp - 80f
    • Print Speed - 40mm/s
    • Cooling - Off
    • Infill - 100%
    • Also using Magigoo original



    • Here is what I am trying to printDesired Result.jpg
    • Print is not flat, it's warped upwards.IMG_4901.jpg
    • The structure at the back of the print is misalignedIMG_4902.jpg
    • Please help suggest what I should change in my settings.
    Try bed temp around 95C.
    Drop your speed to 30-35. Slower is better.
    Preheat chamber with bed for a good 30 mins before starting print.
    On no account open doors until print has finished and everything is back to ambient temperature.
    Don't know about infil but I've never gone above 25%

  3. #3
    That's the good answer. Thank you very much super moderater.


    Stickman Boost

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •