Results 1 to 2 of 2
  1. #1

    New hotend on XYZ Da vinci 1.0 Pro not working

    Hi, My hotend on my da vinci pro broke. Properly after too many taken apart and cleaned and put back together again. It was a 12v 35w hotend. I purchaced a new hotend. This one: is a 40W and not a 35W. I put everything together. However, it does not work. The hotend (and the nozzle) are not heating :-( In my head the 12v hotend should be able to be exchanged with anyother hotend of the same voltage. Is there something that I'm missing? I'm a bit worried that the extruder board might have fried. Br/Thomas
    Attached Images Attached Images

  2. #2
    Join Date
    Aug 2020
    United Kingdom
    Have you checked that the 12V supply to the heater is working . Power supplies do hi wrong and contacts some time fail

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts