Close



Results 1 to 2 of 2
  1. #1

    Can't change resin parameters in Lychee

    All, I have tried to change the number of initial layers, the times and the subsequent layer times in Lychee, but for some reason when I print it always seems to print with the default Lychee resin settings. The printer is a Photon Mono X.I'm pretty certain it is me not understanding how to set it correctly and select it so any help would be appreciatedThanksLes

  2. #2
    Super Moderator curious aardvark's Avatar
    Join Date
    Jul 2014
    Posts
    8,818
    Try chitubox

    It will definitewly change the number of first layers for my proxima mono6.

    Apparently some of these settings are hardwired into the printers firmware.

    For instance: There are three movements per layer.
    peel, secondary lift and then a quick bounce up and down.

    I can't see any purpose for the third step, but no matter what settings I put in the slicer (tried 3 slicers) I cannot stop it doing the third up and down movement.

    If I could eliminate it, it would cut the printing time almost in half, without having to change any other settings.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •