Close



Results 1 to 3 of 3
  1. #1

    Making a mesh file printable

    Putting a project together and I am looking to 3d print a front bumper off a lamborghini huracan. I have found a .STL file on grab cad but it is so thin it is no exisitent. Is there a way to thicken the part to where it could be printed?

    https://grabcad.com/library/huracan-1

  2. #2
    Technologist
    Join Date
    Apr 2021
    Posts
    185
    Yes. Use meshmixer. Then use the create solid tool. Set a high resolution and accuracy, using the preserve sharp edges option, and sets minimum thickness that suits your printer.

  3. #3
    Meshmixer is a good tool to use. Then utilize the tool to make solids. Make sure your printer can handle a high resolution and precision by enabling the option to preserve sharp edges and adjusting the minimum thickness to fit your needs.


    quordle

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •