Close



Results 1 to 6 of 6
  1. #1

    I have problem with printing

    Hello guys, I am facing such a problem. Anyone know why this is so?
    I was always getting very good prints, but for 2 days now I am facing this problem.

    https://i.hizliresim.com/jjggtqh.jpg

    https://i.hizliresim.com/khhz9vg.jpg

    Creality ender 3 v2 , abg --- pla filament ,200 deegre noozle , 60 deegre table

  2. #2
    Staff Engineer Roberts_Clif's Avatar
    Join Date
    Jun 2017
    Location
    Washington State, USA
    Posts
    1,085
    Add Roberts_Clif on Thingiverse
    Looks like a clogged Hot-end, This could be from the Teflon Tube melting or over heated filament that will not extrude.

    A good cleaning of your hot-end will solve this problem
    Last edited by Roberts_Clif; 08-08-2021 at 04:15 PM.

  3. #3
    Hi Is there any material stuck in between the rollers? Take a time to clean the rollers and also check the bus connectivity to the laser beam head. If there is any failure in the connection it will also reflect in the printing. Recently my printer also showed a similar failure with the bus connectivity and I just replaced the bus with the help of an expert. Now it works fine.
    Last edited by Crist12; 08-30-2021 at 02:09 AM.

  4. #4
    This problem must be annoying, have you tried to contact the company that produces the printer?

  5. #5
    Super Moderator curious aardvark's Avatar
    Join Date
    Jul 2014
    Posts
    8,578
    Quote Originally Posted by candrajsorensen View Post
    This problem must be annoying, have you tried to contact the company that produces the printer?
    lol okay that's just funny :-)

    And kind of sweet at the same time.

  6. #6
    Technician
    Join Date
    Jun 2020
    Location
    South Carolina
    Posts
    51
    Quote Originally Posted by curious aardvark View Post
    lol okay that's just funny :-)

    And kind of sweet at the same time.
    LOL. Wish there was a like button for this.

    Looks like underextrusion - probably clogged.
    Also, 200 nozzle temp is low for me. I print PLA at 210 or 215 always. I get similar results when I try to print not hot enough.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •